Architectural USA

pollotimbo (December 21st, 2007 @ 8:56 pm)

dude you so full of crap.inthe first time your drain line is not pitched properly,and you are missing a pit trap,ann you dont need a snake to clean out your drain line. you need to blow it out whith nitrogeon.....amateurs!!!

will79601 (December 12th, 2007 @ 3:01 am)

RIGHT!

will79601 (December 12th, 2007 @ 3:00 am)

uh the condensor is outside not inside,the inside is the evap!

paysonbadboy (November 28th, 2007 @ 9:31 pm)

DUDE! OMG you need to go find yourself a SKILLED HVAC professional that can school you for a few years. THEN you may come back to youtube and do some schooling of your own. All of these videos show IMPROPER procedures, and don't even use proper names for the equipment! BTW, You need to use my DRAINBLASTER-2000 to blow out them drains!

topboywrighty (November 10th, 2007 @ 9:57 am)

What a shoddy install! Why did they not run the condensate drain down the wall? Instead they have it sticking out hanging in mid air...cowboyss yeeeee haaaaaaa!

04hdflstci (November 9th, 2007 @ 9:32 pm)

im glad he is not my a/c guy...dumbass

lukeallen1984 (November 3rd, 2007 @ 3:38 pm)

what a dickhead yet another unskilled worker ruining our trade... never heard of nitrogen expert?? twat

SRVFAN989 (November 3rd, 2007 @ 1:44 pm)

Use a snake to unclog it? Use a Co2 gun it works much better. LOL im still rollin He called the Evaporater a Condenser. To all youi non HVAC-R ppl the Condenser coil is Outside of your house you know the one he was sitting beside while it was running at the beginning of the video.

SRVFAN989 (November 3rd, 2007 @ 1:41 pm)

OMG THIS GUY IS STUPID!

DrZarkloff (October 30th, 2007 @ 5:00 pm)

I want everyone to come to my channel and leave lots of hate comments on my videos. Please.

Beagleslife (October 29th, 2007 @ 8:49 am)

Also if you do clear it out and the Problem is still present. Fallow the entire primary line and set a level on it and make sure that it has a down ward slop. even the SLIGHTEST well "non downward slope" lol will cause a pan fill. Even if it just level will do the same. Also do not take unscrew the adaptor that fits the line to the furnace. ESECIALLY if it is a metal adaptor. This could easily cause damage to your coil. So bad somtimes you might have to replace it.

DrZarkloff (September 29th, 2007 @ 6:36 pm)

Use a wetvac to clear the condensate line. Just suck out all the shit from outside.